Bread Box Drawer

Introducing the new Sliding Bread Box! The innovative sliding top design keeps your bread and pastries fresh for longer.

What’s Included

• Custom Pullout Shelf
• Complete set of your chosen slides
• Mounting hardware for the selected mounting style
• 1 or 2 door protectors per shelf (1 for shelves under 19″ wide)
• 10 wood mounting screws per shelf (5/8″ long)

Clear Opening Width

Measure the available space between the narrowest two points of your cabinet’s opening where the shelf will be installed. This includes any protruding hinges, doors, face frames, etc.

Typically, the lower pullout shelf may be slightly narrower than the upper one, as hinges usually interfere only with the bottom. For frameless cabinets, you may need to account for L-brackets used by the Base or Half Shelf Mounting Styles.

Note: Do not use existing pullout shelves or drawers to determine the Clear Opening Width.

Shelf Depth

Select a Shelf Depth that fits within your available cabinet interior depth, considering any doors or framing. This measurement represents the actual length of the pullout shelf. Keep in mind that the Rear Socket Mounting Style may add an extra 1/4″, so allow for this additional space when ordering.

Note: Do not select a Depth size larger than your interior cabinet depth.

Mounting Styles

• Base Mount: Attaches on top of any existing surface, such as the bottom/floor of the cabinet or a full fixed/adjustable shelf.
• Half Shelf Mount: Utilizes an existing half shelf in the back of the cabinet or a shelf that’s over 2″ shorter than the cabinet depth.
• Side Mount: For mounting an upper shelf without an existing fixed/adjustable shelf. Attaches to the interior sidewalls using a spacer or wood strip to ensure the pullout can slide through the opening.
• Rear Socket Mount: Similar to the Side Mount but attaches the rear of the shelf to the cabinet’s back wall.

The Half Shelf, Side Mount, and Rear Socket Mounting Styles all attach to the face frame or sides of the cabinet at the front, with the rear attachment being the only difference.

Spacers are not automatically included but can be found in our Hardware Section.

For more details on our different mounting styles, click HERE.

Specifications

• Height: 7 3/8″
• Depth: From 11 3/4″ to 25 3/4″ (in 2″ increments)
• Capacity: 100 lbs
• Wood: 1/2″ 9-ply birch sides / 1/4″ MDF bottom
• Finish: 2-coat clear lacquer finish
• Joints: Rabbet corners / Dado bottom
• Warranty: Lifetime / 5 years with Full Extension slides ([BB])

Your custom shelf is made to order in the USA and typically ships within 1-2 weeks.