Kitchen Drawer Replacement 3 1/2″ Tall

Transform your kitchen by replacing old drawers with our high-quality sliding shelf, designed to fit perfectly into the space where your kitchen drawers used to be. This shelf is ideal for organizing cutlery, pots, pans, and measuring spoons. It’s similar to our Premium 2 3/8″ shelf but specifically tailored to fit seamlessly into your kitchen.

What’s Included:

• Custom Pullout Shelf
• Complete set of selected Slides
• Mounting Hardware for the chosen Mounting Style
• 1 or 2 Door Protectors per shelf (1 protector for shelves under 19″ wide)
• 10 Wood Mounting Screws per shelf (5/8″ long)

Clear Opening Width

Measure the available space between the narrowest two points of your cabinet’s opening where the shelf will be installed. Consider any protruding hinges, doors, or face frames. Typically, the lower pullout shelf will be slightly narrower than the upper one due to hinge interference. If you have a frameless cabinet, you might need to deduct for the L brackets used by the Base or Half Shelf Mounting Styles.

Important: Do not measure existing pullout shelves or drawers to determine the Clear Opening Width.

Shelf Depth

Choose a Shelf Depth that fits within your cabinet’s interior depth, behind any doors or framing. This measurement represents the actual length of the pullout shelf. The Rear Socket Mounting Style may add an extra 1/4″ to the Shelf Depth, so be sure to allow for this when placing your order.

Important: Do not select a Depth size larger than your interior cabinet depth.

Mounting Styles

• Base Mount: Installs on top of any existing surface, such as the bottom/floor of the cabinet or a full fixed/adjustable shelf.
• Half Shelf Mount: Utilizes a half shelf at the back of the cabinet or an existing shelf that is more than 2″ shorter than the cabinet depth.
• Side Mount: For mounting an upper shelf without a fixed or adjustable shelf. Attaches to the interior sidewalls using spacers or wood strips to ensure the pullout can slide through the opening.
• Rear Socket Mount: Similar to the Side Mount, but the rear of the shelf attaches to the cabinet’s back wall.

The Half Shelf, Side Mount, and Rear Socket Mounting Styles all attach to the face frame or sides of the cabinet at the front; only the rear attachment varies.

Note: We do not automatically include spacers, but they can be found in our Hardware Section. For more information on our different Mounting Styles, click here.

Your shelf is custom-made to order in the USA and typically ships in about 2 weeks.

Specifications

• Height: 3 1/2″
• Depth: From 11 3/4″ to 25 3/4″ (in 2″ increments)
• Capacity: 100 lbs.
• Wood: 1/2″ 9-Ply Birch sides / 1/4″ MDF bottom
• Finish: 2-Coat Clear Lacquer Finish
• Joints: Rabbet corners / Dado bottom
• Warranty: Lifetime / 5 Years with [BB] Full Extension slides **